How to Read a Forex Quote and Calculate a Pip
A forex quote can look confusing at first. Let's break it down.
Example: EURUSD = 1.0850
- The first currency (EUR) is the base currency
- The second (USD) is the quote currency
- The price means one euro costs 1.0850 US dollars
What is a pip?
A pip is the standard unit of price movement. For most pairs, a pip is the fourth decimal place (0.0001). For JPY pairs, it's the second decimal place (0.01).
If EURUSD moves from 1.0850 to 1.0860, that's a 10 pip move.
What is a lot?
A lot is the size of your position:
- Standard lot: 100,000 units of the base currency
- Mini lot: 10,000 units
- Micro lot: 1,000 units
Pip value (approximate):
For a standard lot of EURUSD, one pip is about $10. For a mini lot, about $1. For a micro lot, about $0.10.
Example trade:
Buy 0.10 lots of EURUSD (a mini-ish size, equal to 10,000 units) at 1.0850. Price moves to 1.0870. That's 20 pips. Profit is about 20 x $1 = $20.
Tips:
1. Check the pip value in your platform before trading
2. Use a calculator for position sizing
3. Remember that JPY pairs and gold use different conventions
Understanding pips and lots is the foundation for measuring risk. Don't place your first trade until you can calculate these without hesitation.
How to Read a Forex Quote and Calculate a Pip
How to Read a Forex Quote and Calculate a Pip
It’s Fairman 
Re: How to Read a Forex Quote and Calculate a Pip
Worked pip example for JPY pairs since they're different. On USDJPY at 149.50, a pip is 0.01, so a move to 149.70 is 20 pips. On EURUSD a pip is 0.0001. Mixing those up is a sizing error I see newer traders make all the time. Another source of confusion is that most brokers now show an extra decimal, sometimes called a pipette. EURUSD might show 1.08505, where the last digit is a tenth of a pip. When your platform says a stop is 150 points away, that's usually 15 pips, not 150. Check how your platform counts before setting stops, especially when you copy settings from a video or another trader.
It’s Fairman 
Re: How to Read a Forex Quote and Calculate a Pip
Another common confusion is fractional pips, the fifth decimal on many platforms. EURUSD at 1.08505 means half a pip above 1.0850. If your broker shows five digits, a 10 pip stop is 100 points on the platform, so double-check what you're entering. The same applies to yen pairs, where USDJPY at 150.255 means the third decimal is the fractional pip. Many EAs and calculators ask for stops in points, not pips, so a setting of 20 meant as pips gives you a 2 pip stop. When you start on a new platform, place a test order on demo and check the stop distance matches what you intended.
It’s Fairman 
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: How to Read a Forex Quote and Calculate a Pip
One detail the post hints at but does not spell out is that the 10 dollar pip only holds when USD is the second currency in the pair. When the dollar is the base, the pip is worth 10 units of the other currency, and you have to convert it back.
Take USDCAD at 1.3700. One standard lot pip is 10 Canadian dollars, which is about 7.30 US dollars, so a 20 pip stop on 0.50 lots risks roughly 73 dollars rather than the 100 you might assume.
USDJPY works the same way. At 150.00, each pip on a full lot is worth 1,000 yen, close to 6.67 dollars, and that value drifts as the rate moves.
Crosses like EURGBP need one more step, since the pip comes out in pounds and then gets converted at GBPUSD. If your account is held in euros or naira, there is another conversion on top.
Gold deserves its own warning because brokers disagree on what a pip even is there. Some call 0.10 a pip and some call 0.01, so for XAUUSD it is safer to think in dollars of price movement times contract size, usually 100 ounces per lot.
Take USDCAD at 1.3700. One standard lot pip is 10 Canadian dollars, which is about 7.30 US dollars, so a 20 pip stop on 0.50 lots risks roughly 73 dollars rather than the 100 you might assume.
USDJPY works the same way. At 150.00, each pip on a full lot is worth 1,000 yen, close to 6.67 dollars, and that value drifts as the rate moves.
Crosses like EURGBP need one more step, since the pip comes out in pounds and then gets converted at GBPUSD. If your account is held in euros or naira, there is another conversion on top.
Gold deserves its own warning because brokers disagree on what a pip even is there. Some call 0.10 a pip and some call 0.01, so for XAUUSD it is safer to think in dollars of price movement times contract size, usually 100 ounces per lot.
-
FXS Prop Desk
- Posts: 1693
- Joined: Wed Oct 07, 2026 9:52 am
Re: How to Read a Forex Quote and Calculate a Pip
One addition for beginners: brokers with five-digit pricing show EURUSD as 1.08503, where the last digit is a fractional pip, or pipette. A move from 1.08503 to 1.08513 is one pip, not ten. Many beginners misread their stop distances by a factor of ten because of this, so it may help to say explicitly how to count pips on five-digit quotes.
FXS Official Team | The Idea Lab & Strategy
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: How to Read a Forex Quote and Calculate a Pip
The example quote is one number, but every platform shows two. EURUSD might read 1.0850 bid and 1.0851 ask, and a buy fills at the higher price while a sell fills at the lower.
That one pip gap is the spread, and it is why a new trade opens slightly negative. At the 0.10 lot size from the example trade, 1 pip is about 1 dollar, so price has to rise a pip just to get back to zero.
Over a month this adds up fast. Five trades a day at 0.10 lots with a 1 pip spread is about 5 dollars a day, or roughly 100 dollars across 20 trading days, win or lose.
Pip value also works in reverse for sizing. Divide the money you are willing to lose by the stop in pips times the pip value per lot, so 20 dollars of risk with a 10 pip stop on EURUSD gives 20 divided by 100, or 0.20 lots.
On USDJPY at 150.00 the same 20 dollars and 10 pips comes out just under 0.30, so 0.29 lots once rounded down to the usual 0.01 step. Doing both sums by hand a few times makes the platform calculator easier to trust.
That one pip gap is the spread, and it is why a new trade opens slightly negative. At the 0.10 lot size from the example trade, 1 pip is about 1 dollar, so price has to rise a pip just to get back to zero.
Over a month this adds up fast. Five trades a day at 0.10 lots with a 1 pip spread is about 5 dollars a day, or roughly 100 dollars across 20 trading days, win or lose.
Pip value also works in reverse for sizing. Divide the money you are willing to lose by the stop in pips times the pip value per lot, so 20 dollars of risk with a 10 pip stop on EURUSD gives 20 divided by 100, or 0.20 lots.
On USDJPY at 150.00 the same 20 dollars and 10 pips comes out just under 0.30, so 0.29 lots once rounded down to the usual 0.01 step. Doing both sums by hand a few times makes the platform calculator easier to trust.
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: How to Read a Forex Quote and Calculate a Pip
A pip is conventionally the fourth decimal place for most pairs, and the second for yen pairs. A pipette, or fractional pip, is a tenth of that, the fifth decimal for most pairs. A point is the platform's smallest price increment, which on a five-digit broker equals a pipette, and on a four-digit broker equals a pip.
That sounds simple until code and indicators meet different brokers. A stop of 10 might mean 10 pips on one platform and 1 pip on another, depending on the digits and the programmer's assumptions.
Indices and metals add more confusion. A point on an index CFD may be a whole index point, or a cent. A pip on gold may be 10 cents or 1 cent, depending on the broker.
Automated strategies should read the symbol's digits and point size and convert distances explicitly. Manual traders should check the symbol specification and calculate the value of a unit in account currency before sizing.
Misunderstanding units causes some of the most embarrassing trading errors, where risk is ten times larger or smaller than intended.
Has a pip versus point mix-up ever caused a mistake, and how is it avoided now?
That sounds simple until code and indicators meet different brokers. A stop of 10 might mean 10 pips on one platform and 1 pip on another, depending on the digits and the programmer's assumptions.
Indices and metals add more confusion. A point on an index CFD may be a whole index point, or a cent. A pip on gold may be 10 cents or 1 cent, depending on the broker.
Automated strategies should read the symbol's digits and point size and convert distances explicitly. Manual traders should check the symbol specification and calculate the value of a unit in account currency before sizing.
Misunderstanding units causes some of the most embarrassing trading errors, where risk is ten times larger or smaller than intended.
Has a pip versus point mix-up ever caused a mistake, and how is it avoided now?