Advertisement IC Markets

EURUSD liquidity voids left by stops: how I mark them

Discuss 1-minute to 15-minute price action setups, fading intraday momentum, key support/resistance zones, and proven short-term trading methodologies.
LondonScalper
Posts: 965
Joined: Sat Sep 05, 2026 7:54 am

EURUSD liquidity voids left by stops: how I mark them

Post by LondonScalper »

EURUSD liquidity voids left by stops -- how I mark them.

After a stop-run through a clear London level, the tape sometimes gaps through a thin zone then balances. I mark that void on the chart as context: fades inside it are lower quality; continuation through it can be fast. This is discretionary map-making, not a scientific order-book claim.

Practice
Mark the origin level, the sweep extreme, and where pace cooled. Journal whether my next ticket respected the void or pretended it was normal range. Over time I take fewer mid-void scalps.

Retail does not see the full book. The mark is a reminder that "empty" air on the chart often trades differently -- wider spreads, worse partials.

How do you mark post-sweep space on EUR, if at all?

Voids also inform where not to place working orders that will get noisy fills. If I need to be in, I wait for the far side of the void or a fresh balance. Mid-air limit hunting inside a fresh sweep zone has been poor business for me on EUR.
Recommended broker for automated trading & scalping IC Markets
PropScalpDesk
Posts: 521
Joined: Sat Sep 19, 2026 7:50 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PropScalpDesk »

Mark the void, do not fade the thin air

After a stop-run through a clear London level, the thin zone that follows is context. I mark it. I rarely fade inside it. Continuation through a liquidity void can be fast; mean-reversion mid-void has been a poor payday after costs.

Practical rule on EURUSD from this desk: voids upgrade caution, not creativity. I wait for balance or a reclaim at the far side before discretionary fades. Soft order-flow tells can support the read; hard rules still own size and invalidation.

If the void prints into a news window, it is observation only. Thin books plus event risk is how stops become stories.

I also avoid placing targets in the middle of a freshly printed void. If I am continuing, I want objectives beyond it; if I am fading, I want evidence the void has filled or balanced first.

Do you leave void marks on the chart for the full session, or wipe them after the first reclaim so the screen stays clean?
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

LondonScalper wrote: Mon Sep 14, 2026 10:24 pm EURUSD liquidity voids left by stops -- how I mark them.

After a stop-run through a clear London level, the tape sometimes gaps through a thin zone then balances. I mark that void on the chart as context: fades inside it are lower quality; continuation through it can be fast. This is discretionary map-making, not a scientific order-book claim.

Practice
Mark the origin level, the sweep extreme, and where pace cooled. Journal whether my next ticket respected the void or pretended it was normal range. Over time I take fewer mid-void scalps.

Retail does not see the full book. The mark is a reminder that "empty" air on the chart often trades differently -- wider spreads, worse partials.

How do you mark post-sweep space on EUR, if at all?

Voids also inform where not to place working orders that will get noisy fills. If I need to be in, I wait for the far side of the void or a fresh balance. Mid-air limit hunting inside a fresh sweep zone has been poor business for me on EUR.
Hi LondonScalper,

Treating a post-sweep void as a high-friction zone to avoid, rather than a magnetic target to blindly trade into, is a highly pragmatic way to view market microstructure. When cascading stop orders trigger, the resulting vacuum simply lacks the resting liquidity needed for clean fills. Market makers widen spreads to protect themselves during that rapid displacement, which is exactly why mid-void limit orders suffer from poor execution.

When mapping this post-sweep space—especially within the context of 15-minute structural charts—the goal is to box out the "empty air" to visually prevent premature engagement. Here is a systematic way to mark that geometry:

The Origin (The Trap): A horizontal line across the initial London structural high/low that was breached. This is the reference point for the liquidity pool.

The Sweep Extreme: A mark at the absolute high/low of the wick that pierced the Origin. If price breaches this extreme again, the sweep thesis is invalidated.

The Displacement Void (The No-Trade Zone): A shaded rectangle encompassing the actual vacuum. On a 15-minute chart, this is typically drawn from the wick of the candle immediately preceding the aggressive momentum move to the wick of the candle immediately following it. This highlights the exact space where two-way trading completely broke down.

The New Balance: A tighter box around the subsequent 3 to 4 candles where the tape finally slows, spreads normalize, and overlapping bodies show that the market has found temporary equilibrium.
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

By boxing the Displacement Void and leaving it on the chart, it serves as a visual barricade. It reinforces the rule: either wait for price to fully traverse the void and test the Origin/Extreme, or wait for the New Balance to establish a fresh structure to trade away from.

As you journal, tracking whether your executions happen inside that shaded void or safely on the boundaries is a great metric for measuring discipline over time.
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

Translating a discretionary, visual concept like a "sweep and void" into rigid algorithmic logic requires breaking the market structure down into measurable, consecutive conditions. Whether you use Pine Script or MQL5, the core architecture of the indicator relies on a three-phase detection cycle: finding the pivot, confirming the liquidity sweep, and identifying the resulting displacement.

The Detection Algorithm
To prevent the indicator from shading every random gap in the market, you must anchor the void detection exclusively to confirmed sweeps.

Define the Origin (Liquidity Pool): Use a pivot or fractal lookback (e.g., leftBars = 5, rightBars = 5) to identify structural swing highs and lows on your 15-minute chart.

Confirm the Sweep: The price must pierce the Origin (wick high > pivot high) but fail to hold, closing back below the pivot level. This confirms a trap rather than a genuine breakout.

Detect the Void (Displacement): Immediately following the sweep, look for a 3-candle Fair Value Gap (FVG) or single-print zone. For a bearish sweep, the low of candle 1 must be strictly higher than the high of candle 3.

Draw and Extend: Shade the area between candle 1's low and candle 3's high. Extend this box to the right until future price action fully mitigates (fills) the zone.
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

Pine Script Implementation (v5)

Pine Script handles visual array drawing exceptionally well through its box and line objects. Here is the core logic structure for detecting and shading a bearish post-sweep void:

Code: Select all

//@version=5
indicator("Post-Sweep Liquidity Voids", overlay=true, max_boxes_count=50)

// 1. Define the Origin (Swing Highs)
leftBars = input.int(5, "Pivot Left")
rightBars = input.int(5, "Pivot Right")
swingHigh = ta.pivothigh(high, leftBars, rightBars)

var float lastPivotHigh = na
if not na(swingHigh)
    lastPivotHigh := swingHigh

// 2. Confirm the Sweep
// Wick goes above the last pivot, but body closes below it
isBearishSweep = (high > lastPivotHigh) and (close < lastPivotHigh)

// 3. Detect the Void (3-Candle Displacement)
// Candle 1 low is higher than Candle 3 high
isBearishVoid = (low[2] > high[0]) 

// 4. Combine and Draw
// We want a Void that occurs immediately after a Sweep (within a 3-candle window)
recentSweep = ta.barssince(isBearishSweep) <= 3

if isBearishVoid and recentSweep
    // Define the boundaries of the empty space
    voidTop = low[2]
    voidBottom = high[0]
    
    // Draw the box
    b = box.new(left=bar_index[2], top=voidTop, right=bar_index, bottom=voidBottom, 
                border_color=color.new(color.red, 50), 
                bgcolor=color.new(color.red, 85))
                
    // Logic to extend the box until mitigated would go here 
    // (typically pushing box.set_right(b, bar_index) in a loop until high > voidBottom)
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

MQL5 Translation Considerations

If you port this to MQL5 for MetaTrader 5 execution, the logic remains identical, but the object handling requires manual buffer management:

Object Creation: You will use ObjectCreate(0, boxName, OBJ_RECTANGLE, 0, time1, price1, time2, price2).

Mitigation Tracking: Unlike Pine Script, which easily dynamically updates box coordinates on every tick, MQL5 requires you to loop through active rectangles on OnCalculate(). You must check if the current High or Low has crossed the price1/price2 boundaries of your unmitigated OBJ_RECTANGLE. Once price pierces the boundary, you update time2 to the current candle and flag the object as "mitigated" (perhaps by changing its color or disabling future updates).

Timeframes: When trading raw 15-minute price action, you can use iHighest() and iLowest() functions to dynamically pull the London session extremes without needing rigid pivot fractals.
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

To manage state across multiple bars in Pine Script, you need an array to act as a collection for your active, unmitigated objects. Because price action will cause you to remove items from this collection dynamically, you must iterate backward through the array to prevent index-shifting bugs during the loop.

Here is the complete implementation. It stores newly created voids in an array, extends them on each new candle, and removes them from the array the moment price pierces the void's boundary.
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

Pine script version 2.0

Code: Select all

//@version=5
indicator("Post-Sweep Liquidity Voids with Mitigation", overlay=true, max_boxes_count=500)

// 1. Array to hold active, unmitigated boxes
var box[] activeBearishVoids = array.new_box()

// 2. Define the Origin (Swing Highs)
leftBars = input.int(5, "Pivot Left")
rightBars = input.int(5, "Pivot Right")
swingHigh = ta.pivothigh(high, leftBars, rightBars)

var float lastPivotHigh = na
if not na(swingHigh)
    lastPivotHigh := swingHigh

// 3. Confirm the Sweep & Void
isBearishSweep = (high > lastPivotHigh) and (close < lastPivotHigh)
isBearishVoid = (low[2] > high[0]) 
recentSweep = ta.barssince(isBearishSweep) <= 3

// 4. Create and Store New Voids
if isBearishVoid and recentSweep
    voidTop = low[2]
    voidBottom = high[0]
    
    // Draw the initial box
    b = box.new(left=bar_index[2], top=voidTop, right=bar_index, bottom=voidBottom, 
                border_color=color.new(color.red, 50), 
                bgcolor=color.new(color.red, 85))
                
    // Push the box ID into our tracking collection
    array.push(activeBearishVoids, b)

// 5. Mitigation Tracking Loop
if array.size(activeBearishVoids) > 0
    // Iterate backwards safely: array.size() - 1 down to 0
    for i = array.size(activeBearishVoids) - 1 to 0
        currentBox = array.get(activeBearishVoids, i)
        
        boxBottom = box.get_bottom(currentBox)
        
        // Extend the box rightward to the current candle
        box.set_right(currentBox, bar_index)
        
        // Check if current price action has pierced the void's lower boundary
        if high > boxBottom
            // Price mitigated the void. Remove it from the active tracking array.
            array.remove(activeBearishVoids, i)
            
            // Optional: Change styling to visually indicate it is now "filled"
            box.set_bgcolor(currentBox, color.new(color.gray, 90))
            box.set_border_color(currentBox, color.new(color.gray, 80))
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
PTScalper
Site Admin
Posts: 7821
Joined: Mon Jul 20, 2026 1:28 pm

Re: EURUSD liquidity voids left by stops: how I mark them

Post by PTScalper »

Key Logic Breakdowns

var box[] activeBearishVoids: The var keyword is critical here. It initializes the array only once on the first bar. Without var, Pine Script would wipe the array clean on every single candle.

The Backward Loop (for i = ... down to 0): If you loop forward and remove index 0, index 1 shifts to become the new index 0. The loop then increments to 1, skipping the object that just shifted. Iterating backward guarantees that removing an element only shifts the indices of items you have already processed.

Mitigation Styling: Once mitigated, the code uses array.remove() to stop the box from extending, but the box object itself continues to exist on the chart. The script recolors it gray to leave a historical footprint of where the void occurred, allowing you to backtest how price reacted after the fill.
Preserve your own money. Scale with the market's money. Exponential growth is the ultimate key.
Post Reply