Advertisement IC Markets

The Asian Range, Use It as Your Map

Discuss 1-minute to 15-minute price action setups, fading intraday momentum, key support/resistance zones, and proven short-term trading methodologies.
Post Reply
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

The Asian Range, Use It as Your Map

Post by Fairman »

The Asian Range, Use It as Your Map

Some traders ignore the Asian session because it looks boring. That boredom is exactly what makes it useful.
diagram.png
diagram.png (38.16 KiB) Viewed 322 times
During the Asian session, price often moves in a tight range. Retail traders mark the high and low, place breakout orders beyond them, and put stop losses on the other side. By the time London opens, there is a pool of liquidity on both ends.

Here is a simple way to use it:

1. Mark the high and low of the Asian session (many use roughly 00:00 to 08:00 UTC, but define your own consistently).
2. Determine your higher-timeframe bias before London opens.
3. If bullish, look for London to sweep the Asian low first, then reverse upward. If bearish, look for a sweep of the Asian high, then a reversal downward.
4. Wait for the sweep to happen. Do not anticipate it.
5. Drop to the 5M or 15M and look for a CHoCH after the sweep.
6. Enter with your stop beyond the sweep and target the opposite side of the range or beyond.

Sometimes London simply breaks out and keeps going. That's why you need confirmation and a stop loss, not blind faith.

The Asian range is a map that tells you where the traps are set. Read the map before the session starts, and you'll feel less rushed when the action begins.
It’s Fairman :geek:
Recommended broker for automated trading & scalping IC Markets
PropScalpDesk
Posts: 521
Joined: Sat Sep 19, 2026 7:50 pm

Re: The Asian Range, Use It as Your Map

Post by PropScalpDesk »

That 00:00 to 08:00 UTC window has a calendar problem. During British summer time London opens at 07:00 UTC, so a 00:00 to 08:00 UTC box includes the first hour of London. On those days the "Asian high" you mark may already be the London sweep you're supposed to be waiting for, and step 4 has nothing left to wait for. In winter the same box ends right at the open.

I define the range in London clock time instead, midnight to 07:00 London, so it shifts automatically twice a year. Any fixed UTC window behaves differently for half the year.

The other thing I'd add to step 3 is that the sweep needs to happen inside a time window. A sweep of the Asian low at 08:15 London is the classic setup; one at 11:30 after a quiet morning is often just the day's real trend starting late, and fading it is how most of my Asian range losses happened.
LondonNewsTrader
Posts: 421
Joined: Mon Sep 21, 2026 9:30 am

Re: The Asian Range, Use It as Your Map

Post by LondonNewsTrader »

Fairman wrote: Mark the high and low of the Asian session (many use roughly 00:00 to 08:00 UTC, but define your own consistently).
Defining the range consistently is the key part. One thing to watch is that the window shifts in real terms when the clocks change. 00:00 to 08:00 UTC is 01:00 to 09:00 London in summer, so in summer the window runs into the first hour of London. Some people deliberately use local session times instead, but whichever you choose, keep it the same in your journal.

I'd also check what printed during Asia. Japanese, Australian and Chinese data all land in that window, and a release can stretch the range on one side. A range built partly from an Australian jobs spike is not the same map as one built from quiet drifting, and the liquidity sitting outside it may already have been taken.

Your note about London simply breaking out is fair. It happens most when there is a European release in the first hour.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: The Asian Range, Use It as Your Map

Post by Shadow Trader »

PropScalpDesk's London clock window is what I use too, and the extra filter I added is about the size of the box against the sweep. Step 6 says target the other side of the range, but that only pays if the range is wide compared with the stop you need.
img_12660_r1.png
img_12660_r1.png (86.42 KiB) Viewed 258 times
The chart is a made up EURUSD M5 session with an Asian box from 1.0820 to 1.0848 and a sweep to 1.0813 at 07:25 London. Entry after the shift comes in near 1.0826 with the stop at 1.0809, so 17 pips of risk against 22 pips to the Asian high.

That is about 1.3 to 1 before costs, on a box that looked generous. On a 15 pip Asian range the same sweep depth leaves almost nothing, so I skip unless the far side is at least 1.2 times the stop.

LondonNewsTrader's point about Asian data matters here as well. When an Australian release made one edge of the box, I mark that edge as already swept and only trade the other side.

Does anyone measure sweep depth in pips or as a fraction of the range? I have been using pips and suspect the fraction would travel better across pairs.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: The Asian Range, Use It as Your Map

Post by Shadow Trader »

PropScalpDesk's time window for the sweep is the rule I would make explicit in step 3. A fixed cut off works better for me than judging it case by case, so a sweep that first prints after 09:30 London is treated as trend rather than a trap.

The case the six steps do not cover is London taking both sides. Say price runs the Asian low at 07:20, reverses, and then also runs the Asian high around 08:40 before falling back inside.

At that point both pools Fairman describes have been used, and the box stops being a map for the rest of the day. I close anything still open from the first sweep when the second one happens and take nothing else off that range.

Mondays need their own handling too. The Sunday reopen can leave a gap and a thin first hour, so the Asian low may be a price that barely traded, and I start the Monday box an hour later than usual.

Fairman, in step 5 do you require the CHoCH to break a swing formed after the sweep, or does any M5 swing inside the box count? The second version fires earlier with a tighter stop, but it seems to fail more often.
FXS Prop Desk
Posts: 1690
Joined: Wed Oct 07, 2026 9:52 am

Re: The Asian Range, Use It as Your Map

Post by FXS Prop Desk »

One nuance to the plan: the definition of the Asian range changes the result a lot. Using 00:00–06:00 Prague time versus the full Tokyo session gives different highs and lows, and the sweep logic depends on which levels other traders are watching. Testing a couple of fixed definitions and keeping the one with cleaner reactions is a practical way to choose.
FXS Official Team | The Idea Lab & Strategy
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: The Asian Range, Use It as Your Map

Post by Shadow Trader »

For traders in the Americas or Europe, the Asian session means unusual hours. Some thrive on a night schedule. Others end up exhausted and making poor decisions.

If the plan involves trading Tokyo or Sydney hours, sleep needs a deliberate structure. A consistent sleep window, even if unconventional, beats a chaotic one. Dark curtains, quiet surroundings and limited caffeine late in the cycle help. Flip-flopping between day and night schedules is the worst option for performance.

Health considerations matter: regular meals, daylight exposure when possible, and exercise. Long-term night work carries risks that no trading profit justifies.

Another question is whether the Asian session suits the strategy at all. Lower liquidity and narrower ranges in some pairs mean smaller opportunities and relatively higher costs. Pairs tied to the region, like USDJPY, AUDUSD and NZDUSD, may justify the effort.

Some decide the better trade-off is simply skipping Asia and focusing on the sessions that fit a normal day.

Has trading the Asian session been worth the schedule disruption, and what pairs made it worthwhile?
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: The Asian Range, Use It as Your Map

Post by Fairman »

The summer time shift in the Asian window is a fiddly detail that I got wrong for a while. I'd defined the range as 00:00 to 08:00 server time, then in the summer months my range quietly included the first hour of London, and the map had London's own move baked in. The breakouts I thought I'd found were partly the range being measured after London had already pushed.

On the data point, a good example: the Australian jobs number comes out at 02:30 London, and if it moves AUDUSD 40 pips, the Asian high or low for that pair has been set by one print. For EURUSD, the effect might be just 8 pips, but the range for the dollar crosses can be stretched. Hypothetically, a 25 pip range stretched to 40 pips by one release makes a breakout trade with a 10 pip stop and 20 pip target look very different, since the liquidity beyond the edge may have been taken during Asia.

I now keep two lines in the note for each day: the range, and whether a release took part in forming it. Over about 30 days, the ranges with a clean drift broke at the London open about twice as often as those with a release, a rough count but something I'd want to test properly.

Do you fix the window in UTC all year or switch with the clocks? And do you mark the European releases in the first London hour on the same chart?
It’s Fairman :geek:
Post Reply