Advertisement IC Markets

Roundup: VPS and latency for retail scalpers, what actually matters and what's marketing

Compare ECN/Raw spread brokers, analyze execution speeds, report slippage, and evaluate commission structures for high-frequency traders.
Post Reply
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Roundup: VPS and latency for retail scalpers, what actually matters and what's marketing

Post by Fairman »

Roundup: VPS and latency for retail scalpers, what actually matters and what's marketing

VPS and latency threads keep appearing on the brokers board with one or two replies each. Read side by side they land on a fairly clear position, with one or two real disagreements, so here's the combined picture.

Know what the number measures

The ping vs execution thread splits it into three: ping is the network round trip to the broker's server, execution time is how long the server takes to fill and confirm, and total order latency is both plus platform processing. A nearby VPS might cut ping from 20 to 80 ms down to 1 to 5 ms, but for most manual scalpers execution time and fill quality matter far more than those tens of milliseconds.

The hosting claims thread makes a related point about "sub-millisecond to major venues". That's usually true for the provider's data centre to some well-known building. It only helps you if your broker's trade server is actually in that building. Several threads say the same thing in different words: care about the path, not the city name on the sales page. The VPS city thread suggests asking support where your account is actually booked, and notes the answers range "from precise to poetic".

Speed versus reliability

This is where most threads end up. The millisecond marketing thread walks through the chain: you see a candle, decide, move the mouse, click. That's easily half a second before any network is involved. So for discretionary work, a stable 1 to 2 ms connection matters as reliability, not as a race. Measure worst ping and disconnect count, not the average.

The partner VPS thread found broker-supplied VPS in the same data centre really did give steady low ping, but low ping on a quiet afternoon proves little. The test is the London open and news minutes.

The disagreement: VPS or home connection for manual trading

The dedicated line thread has the best exchange on this. A VPS near the matching engine helps the terminal, but a reply points out you're then clicking through remote desktop from home, so every chart update and click carries your home latency anyway. The conclusion there was that location and stability usually beat raw home speed, but a bad VPS is worse than a clean local connection. And from the general latency thread, a wired connection instead of Wi-Fi is the cheapest steadiness fix most people never make.

Keeping the machine healthy
  • The CPU overload thread is a cautionary one: twelve charts, three DOM windows and two forgotten EAs left over a weekend pushed a VPS to 100% CPU just before London, and a stop click lagged. The fix was subtraction: four charts, no browsers on the box, reboot and CPU check on Sunday.
  • The summer health checklist thread does a ten-minute weekly check written to a file, because thin August mornings hide a degrading machine until the first busy September open.
  • The OnTick timestamp thread logs tick gaps against an NTP-synced clock. Spikes cluster around news and VPS load, which is enough to tell you when the machine is sick, though not enough to claim any edge.
Overall: put the server where the broker is if you run EAs, measure the bad moments, and don't pay extra for microseconds you can't use.

For the manual scalpers here, did moving to a VPS change your fills, or did it mostly just make things more stable?

Threads this pulls from
It’s Fairman :geek:
Recommended broker for automated trading & scalping IC Markets
FXS Prop Desk
Posts: 1691
Joined: Wed Oct 07, 2026 9:52 am

Re: Roundup: VPS and latency for retail scalpers, what actually matters and what's marketing

Post by FXS Prop Desk »

For most manual scalpers, consistency of execution matters more than raw speed. A VPS that gives 2 ms ping but sometimes freezes for a few seconds is worse than a home connection at 30 ms that never drops. Monitoring the variation in ping over a day tells you more than the average.

Where a VPS really helps is reliability for EAs and trade-management tools. If a breakeven or trailing script runs on a home computer and the internet goes down, the stops are not managed. Running it on a VPS removes that risk, regardless of latency.
FXS Official Team | The Idea Lab & Strategy
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Roundup: VPS and latency for retail scalpers, what actually matters and what's marketing

Post by Shadow Trader »

Institutional high-frequency firms rent rack space in the same building as an exchange's matching engine, shaving microseconds. Retail forum posts borrow the word and apply it to a VPS sitting somewhere in the same city as a broker.

The gap is enormous. A retail VPS reaches the broker's server in a few milliseconds at best. That server then passes the order through a risk check, a pricing engine and a bridge to liquidity providers, each adding delay. The final fill may come tens of milliseconds later.

Shaving another millisecond off the first leg changes almost nothing when the later legs cost forty.

That doesn't make a VPS pointless. It removes the worst variability, such as home Wi-Fi, power cuts and sleeping laptops. It simply doesn't turn a retail account into a speed player.

A more useful investment is understanding where the delay actually sits. Measuring the time from sending to fill, and comparing it with the ping to the server, shows how much of the total is network and how much is the broker's own processing.

If the broker's internal handling dominates, no VPS upgrade will help, and a different broker might.

What portion of the total fill time has turned out to be network, and what portion was broker processing?
Post Reply