Advertisement IC Markets

Calibrating a news filter I actually follow (no new indicators)

Real-time market analysis, live trade entries, order flow commentary, and daily setups for the London, New York, and Asian session overlaps.
Post Reply
LondonNewsTrader
Posts: 421
Joined: Mon Sep 21, 2026 9:30 am

Calibrating a news filter I actually follow (no new indicators)

Post by LondonNewsTrader »

My news filter failed for years because it lived in my head. Calibration meant writing thresholds I would not negotiate.

Current filter, no extra indicators:

- Tier-1 on the pair: flat from T-15 until spread snap-back and my re-entry clock.
- Second-tier: only pre-written setups, half size, no new ideas in the spike.
- Everything else: normal London rules.

Calibration is reviewing once a month whether I broke the filter. If I find two breaches, I do not add a widget. I shorten permission - for example, second-tier becomes stand-aside for two weeks. The filter has to be followable on a busy Thursday. If it needs a dashboard of indicators to interpret, I will ignore it under stress.

The phrase "actually followed" is doing the work. A perfect filter you override is decorative. I keep the written version next to the platform clock, not buried in a long playbook I never open mid-session. When I calibrate, I change one threshold at a time and keep the rest frozen for two weeks. Changing the whole filter after one bad CPI day is how the sheet becomes a mood diary.
Recommended broker for automated trading & scalping IC Markets
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Calibrating a news filter I actually follow (no new indicators)

Post by Shadow Trader »

The part I'd steal is shortening permission instead of adding a widget. Every time I bolted something onto my filter after a bad day, I ended up with a rule I needed to interpret, and interpreting is exactly what I can't do at 13:29.

One thing I'd want pinned down is "spread snap-back". Mine is written as spread back under 1.5 times its normal London level and holding there for 60 seconds, then a 3 minute re-entry clock on top. Without a number, snap-back quietly becomes "it looks calmer now".

I also count breaches per event rather than per ticket. On one NFP I broke the filter twice inside four minutes, and counting that as two breaches would have put me on stand-aside for what was really one lapse.

The flip side is a slow leak, like one second-tier ticket at full size every week. That's a single breach each time but a pattern over the month, so I tag size breaches separately from timing breaches.

Do you log a near miss, where you had the order typed in the window but didn't send it? I started counting those as half a breach and it told me more than the actual breaches did.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Calibrating a news filter I actually follow (no new indicators)

Post by Shadow Trader »

LondonNewsTrader, near misses taught me more than breaches, so I made the log stupidly concrete. A near miss is any order I typed, sized, and had my finger on send during a blackout window, even if I cancelled it.

Those half breaches clustered on second tier US prints where I had already given myself half size permission. The permission was the leak. Full stand aside for two weeks fixed it faster than any new widget.

I also keep a monthly count of three tags: timing breach, size breach, and near miss. When near misses outnumber real breaches two to one, the filter is clear and my hands are the problem.

The written sheet next to the clock now has one extra line for the current permission state. Second tier allowed, second tier half only, or second tier flat. Changing that line is a Sunday job, not a 13:20 job.

Have you tried a cool down after a near miss, like no new tickets for fifteen minutes? That small pause stopped me turning the near miss into a real one on the next spike.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Calibrating a news filter I actually follow (no new indicators)

Post by Shadow Trader »

Occasionally a quote stream turns jittery. The bid flips between two values several times per second, say 1.08521 and 1.08523, with no net direction. Candles stay small, but the tick count balloons.

The usual explanation is a liquidity provider that updates its price constantly, or two providers alternating at the top of book. Nothing is wrong, it's just how aggregated feeds behave when two sources compete for the best price.

For scalpers it has an annoying side effect. Entry and exit prices become unpredictable at the level of a tick. An order sent at the bid might fill at either number, and a tight stop can get touched by a flicker that has no meaning.

It also messes with indicators that count ticks. Momentum readings based on the last few ticks can show a "surge" that is really just oscillation.

Some platforms let users filter ticks or set a minimum price change to register. Few traders do, and the effect on signals can be larger than any parameter tuning.

The simplest remedy is a minimum-change filter in whatever code reads the feed: ignore price updates smaller than a set number of points. On a chart, a tick filter or a higher-timeframe view hides the flicker without changing the underlying quotes.

Does flickering seem to happen at certain times or with certain brokers?
Amanhasnoname
Posts: 2060
Joined: Fri Oct 30, 2026 9:45 am

Re: Calibrating a news filter I actually follow (no new indicators)

Post by Amanhasnoname »

The cool down after a near miss is something I added about six months ago and it made a real difference. My version is ten minutes with the platform minimised, and I write one line in my log about what made me want to send the order. Most of the time the line says something like the move looked too clean to miss, which is exactly the feeling the filter exists to override.

I also like the idea of changing one threshold at a time. I used to rewrite my whole news filter after a bad day, and as you say, it turned into a diary of my moods. Now I only allow changes on the first weekend of the month, and only to one line, with a note on why.

One addition that helped me is putting the next high impact release time on a sticky note next to the screen each morning. My filter was always clear, but I kept getting caught by second tier numbers I'd simply forgotten about. Having the times in front of me removed most of those breaches.
Post Reply