Advertisement IC Markets

Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Optimize MetaTrader 4, MetaTrader 5, cTrader, and TradingView for speed. Discuss Level II Market Depth (DOM), custom hotkeys, and volume indicators.
Post Reply
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by Fairman »

Distance from the 200 EMA on M15 as a stretch filter before I fade anything

I like having a check against fading moves that are really part of a bigger trend. The 200 EMA on M15 gives me a rough sense of the larger direction, and the distance from it tells me how stretched price is.

When price is close to the 200 EMA, I'm comfortable with range or pullback trades in either direction because there's no strong bias. When price is far from it, in one direction, I'm cautious about fading. It's a strong move, and the chance that it continues is higher. I only fade when I see clear exhaustion signs and I reduce size.

I don't have a precise distance rule. I look at past examples on the chart and see what looked far. Something like a multiple of the recent average candle range, as a rough guide. If price is stretched that much, I need more confirmation before taking a counter trade.

The line is also useful as a target for mean reversion. When price is stretched and starts coming back, the 200 EMA is where it might be heading, though I don't expect it to get there every time.
It’s Fairman :geek:
Recommended broker for automated trading & scalping IC Markets
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by Fairman »

I use something similar, but I measure the distance in ATR rather than by eye. When price is more than about two ATR from the 200 EMA on M15, I treat it as stretched and I do not fade without a clear structure break on the lower timeframe. It is not exact, but it gives me a consistent number instead of a feeling. I tested a few values on past charts and the exact number mattered less than having a rule at all. The main point is stopping myself from fading strong trends.
It’s Fairman :geek:
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by Fairman »

Good point about using it as a target. When I do take a mean reversion trade from a stretched position, I do not expect price to go all the way back to the EMA in one go. I take partial profit at the first level and leave the rest with the EMA as the far target. The line moves, of course, so the target drifts toward price as time passes. It works better on quiet days than on trend days, where price can stay stretched for hours.
It’s Fairman :geek:
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by Shadow Trader »

Which ATR goes into the two ATR rule matters more than the number two. An M15 ATR shrinks a lot in the Asian session, so a distance that is ordinary in London can read as badly stretched overnight.
img_13590_r1.png
img_13590_r1.png (86.17 KiB) Viewed 434 times
Say price holds about 20 pips above the 200 EMA from late Asia into the London morning. With the M15 ATR near 4 pips in Asia the two ATR line sits at 8 pips, and once London gets moving and the ATR is near 10 it sits at 20, which the chart (illustration) shows as a made up day.

Nothing about the trend changed in that example, only the ruler did. A fade taken overnight on that signal would be fighting the same move that looks normal an hour later.

Using a slower measure fixes most of it, such as the M15 ATR averaged over the last few days, or a fraction of the daily ATR. Either one keeps the stretch reading steady through quiet hours.

The partial exit idea above also gets easier with a steady ruler. Has anyone tried using the halfway point to the EMA as the first target instead of the nearest level?
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by Shadow Trader »

The drifting target mentioned above can be put in numbers. A 200 period EMA moves about 1 percent of the remaining gap toward price on each bar, since its weight per bar is 2 divided by 201.

If price sits still 20 pips above it, the gap halves in about 69 bars, which on M15 is roughly 17 hours. So a stretch can disappear through time alone, without any pullback in price.

That matters for the two ATR rule. A pair that ran hard in the morning and then went sideways can drop under the threshold by the next session and invite a fade, even though nothing about the move has weakened.

One way around it is to measure the stretch from the EMA value at the start of the move, or to require a lower high on M15 before any fade. Either keeps the filter tied to what price did rather than how long it waited.

Is the EMA as a far target ever reached on trend days? Counting how many stretched fades get within 5 pips of the line before the session ends would show whether that target is realistic.
FXS Prop Desk
Posts: 1689
Joined: Wed Oct 07, 2026 9:52 am

Re: Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by FXS Prop Desk »

To make the stretch filter consistent across pairs, measuring the distance in ATR units instead of pips works well. A distance of 3 ATR means something similar on EURUSD and GBPJPY, while 30 pips means very different things.

Have you found a threshold where fades start to work better? It would help to look at the results of fades grouped by distance, for example under 1 ATR, 1 to 2 ATR and above 2 ATR.
FXS Official Team | The Idea Lab & Strategy
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Distance from the 200 EMA on M15 as a stretch filter before I fade anything

Post by Shadow Trader »

Scalpers who run stops of two to four pips eventually meet the minimum stop level. Brokers set a minimum distance between the current price and any stop or limit order, and that distance can change by pair and by time of day.

The annoying part is that it is rarely static. During quiet hours the minimum may sit at zero or one pip. Near news or at the rollover it can jump to five or ten. An order that worked ten minutes ago gets rejected with a vague error such as invalid stops.

Anyone running automation should read the stop level from the symbol specification at the time of each order instead of hard-coding a value. Manual traders should check the contract details of each pair and note which ones have unusually wide minimums.

It is also worth knowing that the minimum applies to modifications, not just fresh orders. A trailing stop that hugs the price can fail silently if the distance falls inside the limit.

One more point: the stop level can differ between order types on some platforms. A market order with an attached stop may be checked against a different distance than a pending order. A quick test with each order type at the smallest accepted distance shows what the real rules are.

Which pairs on your platform have the widest minimum stop distance, and have they changed over time?
Post Reply