Advertisement IC Markets

Scalping the Pullback After a News Spike

Discuss 1-minute to 15-minute price action setups, fading intraday momentum, key support/resistance zones, and proven short-term trading methodologies.
Post Reply
FXS Prop Desk
Posts: 1690
Joined: Wed Oct 07, 2026 9:52 am

Scalping the Pullback After a News Spike

Post by FXS Prop Desk »

Trading the release itself means fighting wide spreads and slippage. Waiting for the first pullback trades the same information with much better execution.

A common framework:
  • Wait 3–10 minutes after the release until spreads return to near-normal levels.
  • Measure the spike from the pre-release price to its extreme.
  • Look for a pullback that holds somewhere between roughly 38% and 62% of the spike.
  • Enter in the spike's direction on a break of the pullback's structure, stop beyond the pullback extreme.
Where it fails:
  • Mixed data, where the first move reverses completely.
  • A second release or a speech shortly after.
  • Spikes caused by a single number that is revised or contradicted in the details.
Checking the bond market reaction helps: if yields moved in line with the currency, continuation is more likely.

How long do you wait after a release before looking for an entry?
FXS Official Team | The Idea Lab & Strategy
Recommended broker for automated trading & scalping IC Markets
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Scalping the Pullback After a News Spike

Post by Fairman »

FXS Prop Desk wrote: Wait 3–10 minutes after the release until spreads return to near-normal levels.
The 3 to 10 minute range is wide enough that it's worth tying to something observable rather than the clock. Spread is one, but you could also wait for the first M1 candle after the spike that closes inside the previous candle, as a rough sign the first burst of orders has run out. The other thing is that the 38 to 62% zone can get tagged within the first minute if the opening tick overshoots and snaps back, so measuring the spike from the extreme of the first full minute rather than the very first print gives cleaner levels. Mixed data is the real killer though, as you say. If the details contradict the headline, standing aside usually beats guessing which part the market will pick.
It’s Fairman :geek:
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Scalping the Pullback After a News Spike

Post by Shadow Trader »

The part I would add is a time limit on the pullback. If price is still drifting in the 38 to 62 percent zone twenty minutes after the release, the news has been absorbed and I stop treating it as a news trade.
img_13642_r1.png
img_13642_r1.png (63.2 KiB) Viewed 115 times
The chart is a made up EURUSD M1 example of the version I do take. Price sits at 1.1650 before a 13:30 release, the spike tops at 1.1688 in the second minute, and the pullback holds at 1.1669, half of the 38 pip move.

Entry is the break of the small lower high inside the pullback at 1.1675, with the stop under the pullback low at 1.1666. That risks 9 pips for a retest of 1.1688, only about 1.4R, so I would not take it if the pullback had gone past 62 percent.

Fairman's inside candle idea fits well here, since the first M1 close inside the prior candle often marks the start of the pullback. In this example it came at 13:32, two minutes after the print.

On the yields check, I watch the 2 year rather than the 10 year on US data. A EURUSD spike with a flat 2 year is the one I distrust most.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Scalping the Pullback After a News Spike

Post by Shadow Trader »

Coming back to FXS Prop Desk's question on how long to wait, I stopped using the clock and now wait for the EURUSD spread to sit back under 0.3 pips for a full minute. On CPI that usually takes 2 to 4 minutes, while on payrolls it can take 8 or more.

Payrolls is also where I part ways slightly with Fairman's idea of measuring from the first full minute. On NFP that minute often trades 20 pips both ways, so I measure the spike from the high or low of the first 5 minute candle instead.

The failure that has cost me most is a second scheduled event. A 13:30 print followed by a Fed speaker at 14:00 or a survey at 15:00 gives the pullback trade very little room to work.

My rule now is that if the next tier one event is less than 60 minutes after the first, I halve size and close whatever is open 5 minutes before it. The target has to be reachable inside that window or I skip it.

Has anyone tracked how often the pullback works on the first release of a two print day compared with a quiet afternoon? My sense is that it is noticeably worse, but I only have about 30 examples logged.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Scalping the Pullback After a News Spike

Post by Shadow Trader »

The first move after a major release is chaotic, with spreads wide and fills unreliable. A common approach among scalpers is to wait and trade the second move, the more orderly directional move that sometimes follows after the initial spike settles.

The logic is that once spreads normalize and liquidity returns, the market begins to price the information in a more considered way. A pullback to a key level, followed by continuation, offers a cleaner entry than the initial burst.

Defining the second move objectively is essential for testing. For example, one might require a retracement of a set fraction of the initial move, followed by a break of a short-term high or low. Measuring the frequency of continuation and the average profit after costs, across many events, reveals whether the pattern holds. Different releases behave differently, so separating results by event is advisable. The strategy requires patience, since the best setups appear only after the noise has passed.
Post Reply