Advertisement IC Markets

Auditing Your Trading Costs, Where Your Profit Quietly Goes

Compare ECN/Raw spread brokers, analyze execution speeds, report slippage, and evaluate commission structures for high-frequency traders.
Post Reply
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by Fairman »

Auditing Your Trading Costs, Where Your Profit Quietly Goes

Many traders know their win rate but not their costs. Over months, spreads, commissions, swaps, and slippage can quietly consume a large part of profits.

How to do a cost audit:

Step 1: Gather your last 50 to 100 trades. Include pairs, sizes, and times.

Step 2: Calculate spread cost. For each trade, multiply the average spread in pips by the pip value and lot size.

Step 3: Add commissions and fees. Take them from your statement.

Step 4: Add swap charges for trades held overnight.

Step 5: Estimate slippage. Compare intended entry and exit prices with actual fills.

Step 6: Sum everything. Compare total costs to your gross profit or loss.

What you might learn:

- Trading during low-liquidity hours costs more
- Small targets are heavily affected by spreads
- Some pairs or brokers cost much more than others
- Overtrading multiplies costs

How to reduce costs:

1. Trade active sessions with tighter spreads.
2. Choose liquid pairs.
3. Reduce trade frequency.
4. Aim for larger targets relative to costs.
5. Compare brokers regularly.

An edge must exceed costs to be real. If your edge is small, costs may erase it.

Know your numbers, and you'll know where to improve.
It’s Fairman :geek:
Recommended broker for automated trading & scalping IC Markets
LondonNewsTrader
Posts: 421
Joined: Mon Sep 21, 2026 9:30 am

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by LondonNewsTrader »

For step 2 on spread cost, I'd measure the spread at the moment of each fill rather than using an average. Spreads are not evenly distributed through the day. If most of your trades were taken in London and New York hours, the average is fine. If some were taken in the minutes after a release, or near the 5 p.m. New York rollover, those individual trades will have paid several times the normal spread, and an average hides that.

MT5 can show this if you export the history with the bid and ask, or you can record the spread at entry by hand for a month. When I did it, the trades taken within five minutes of a major data release paid around four times my normal spread on average, and that one category accounted for a big share of my total costs.

Your point that an edge must exceed costs is the whole thing in one sentence.
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by Fairman »

A thing I noticed when I did my own cost audit: swaps were the surprise. I'd held a few trades over several nights on the wrong side of the carry and it added up to more than I'd guessed. Worth checking that column specifically if you ever hold overnight.
It’s Fairman :geek:
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by Fairman »

Another thing that came out of my audit: trading the session open on certain pairs was costing more than I thought because spreads were still wide. Moving my entries 15 minutes later cut costs a bit without changing the strategy. The London open is 8am Lagos in summer, and on pairs like GBPJPY or EURAUD the spread in the first few minutes can be double what it is by 8:15. The same happens at the Tokyo open and around rollover at 10pm Lagos. If your platform lets you export the spread at entry, sort your trades by entry time and compare the average spread for each hour.
It’s Fairman :geek:
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by Shadow Trader »

Step 5 is worth splitting into entry slippage and exit slippage, because they have different causes and different fixes. Entries can often be moved to limit orders, while stops are market orders by nature and take the hit in fast moves.

Say there are 100 trades in the audit, 45 of them closed at the stop with an average of 0.6 pips of slippage each. That is 27 pips in total, or 0.27 pips a trade across the whole sample, and it never appears as its own line on the statement.

On a scalp aiming for 6 pips, 0.27 pips is 4.5 percent of the target gone before spread and commission are counted. Added to a 1.2 pip all in cost, the trade needs about 1.5 pips just to break even.

Commission is also easy to undercount when it is not converted. A 7 dollar round trip per lot on EURUSD is 0.7 pips, which can be more than the raw spread on some account types.

Do you track stop slippage separately from entry slippage, or fold them into one number? The split is what tells you whether to change order types or just the hours you trade.
FXS Prop Desk
Posts: 1689
Joined: Wed Oct 07, 2026 9:52 am

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by FXS Prop Desk »

A cost audit often shows that swaps and slippage are bigger than expected. Spreads and commissions are visible on every trade, but swap and slippage only appear in the details.

Expressing total costs as a percentage of gross profit is a useful summary. If costs take more than about 30 percent of gross profit, reducing them is likely to improve results more than any change to entries.
FXS Official Team | The Idea Lab & Strategy
gwhitlock64
Posts: 60
Joined: Tue Oct 20, 2026 11:01 pm

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by gwhitlock64 »

Shadow Trader wrote:Step 5 is worth splitting into entry slippage and exit slippage, because they have different causes and different fixes.
Shadow Trader, yes i split them, and tbh its the only way the numbers made sense to me. My limit entries had basically no slippage, but stops were averaging getting on for a pip on GBPJPY whenever i held through news... gutted doesnt cover it. Wierd thing was my commission was charged in dollars while the account is in sterling, so i was undercounting it until i converted each trade at that day's rate. Now i just log the stop level against the actual fill in a spreadsheet, takes two minutes and its definately worth it. Moved my stops away from the obvious news minutes after that, which did more than any tweak to my entries.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by Shadow Trader »

gwhitlock64 wrote: Fri Oct 23, 2026 12:32 pmWierd thing was my commission was charged in dollars while the account is in sterling, so i was undercounting it until i converted each trade at that day's rate.
Thanks gwhitlock64, the currency point is one most cost audits miss. Converting each commission at that day's rate is the right fix, since a single fixed rate drifts further out the longer the log runs.

The news finding is the bigger win, and the arithmetic shows why. Say 40 trades closed at the stop, 10 of them held through news with 0.9 pips of slippage each and the other 30 at 0.2.

That is 9 plus 6 pips over 40 stops, about 0.38 pips each. Keeping clear of the news minutes brings it down to 0.2, roughly halving the exit cost without touching the entries.

Have you checked whether the GBPJPY stops slip more at the London open as well, or was it mainly the releases?
gwhitlock64
Posts: 60
Joined: Tue Oct 20, 2026 11:01 pm

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by gwhitlock64 »

Not really, mate. I only had about 20 stops near the London open in my log, and the slippage on those was tiny, maybe 0.2 pips, so basically the same as a normal day. What got me there was the spread, which was still wide in the first few minutes, so a couple of stops got clipped that wouldnt have been touched at 8:15. Didnt show up as slippage at all, just a dodgy fill price in the spreadsheet and a stop that looked like it had been hit a bit early. The releases were where the proper damage was, tbh, but its a small sample so take it with a pinch of salt... ta for asking, made me go back and look at teh open trades again.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Auditing Your Trading Costs, Where Your Profit Quietly Goes

Post by Shadow Trader »

gwhitlock64 wrote: Sat Oct 24, 2026 5:00 pmNot really, mate. I only had about 20 stops near the London open in my log, and the slippage on those was tiny, maybe 0.2 pips, so basically the same as a normal day. What got me there was the spread, which was still wide in the first few minutes, so a couple of stops got clipped that wouldnt have been touched at 8:15. Didnt show up as slippage at all, just a dodgy fill price in the spreadsheet and a stop that looked like it had been hit a bit early. The releases were where the proper damage was, tbh, but its a small sample so take it with a pinch of salt... ta for asking, made me go back and look at teh open trades again.
Thanks gwhitlock64, that is a useful split, and it explains why the open looked fine in the slippage column while still costing you stops.

A spread clip never shows as slippage, because the fill lands exactly on the stop. Say a short has its stop 2 pips above the high on the bid chart and the spread jumps from 1 pip to 3 at the open. The ask can then reach the stop while the bid never makes a new high.

On shorts, one extra column catches it: whether the bid itself ever reached the stop level. If it did not, the spread did the damage, and either a later entry or a buffer sized for the opening spread deals with it.

Fair point on 20 stops being a small sample, but clipped stops are easy to spot by eye, so even a short log shows the pattern.
Post Reply