Advertisement IC Markets

Retests: The Second Chance After a Breakout

Discuss 1-minute to 15-minute price action setups, fading intraday momentum, key support/resistance zones, and proven short-term trading methodologies.
Post Reply
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Retests: The Second Chance After a Breakout

Post by Fairman »

Retests: The Second Chance After a Breakout

After price breaks a level, it often returns to test it from the other side. Broken resistance becomes support, and broken support becomes resistance. This return is called a retest.
diagram.png
diagram.png (36.19 KiB) Viewed 325 times
The logic is straightforward. Traders who missed the break wait for a pullback. Those who were on the wrong side exit at the level, often at breakeven. Both add orders around the same price.

A retest offers practical advantages. The stop can be placed just beyond the level, which is typically a smaller distance than entering at the breakout. And you receive information, because how price behaves at the level shows whether the break was real.

A healthy retest shows rejection: a wick or a reversal candle at the level, followed by movement away. A weak retest, where price closes back through the level, suggests the break may have failed.

The downside is that not every breakout retests. Strong moves can run away without looking back, and waiting means missing them. This is the trade-off: patience gets better prices but fewer trades.

Retests are more reliable on levels that were significant before, such as multi-touch zones or higher-timeframe levels.

Practical step: for your next five breakouts, note whether a retest occurred and how many pips price returned before moving on.
It’s Fairman :geek:
Recommended broker for automated trading & scalping IC Markets
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Retests: The Second Chance After a Breakout

Post by Fairman »

Small thing to add: not every breakout retests. In strong moves price can just leave, and waiting for a retest means missing it. I accept that trade off. Missing some moves is cheaper than chasing every break that later fails. If you want some exposure to the ones that don't come back, one option is a small position on the breakout close and the main position on the retest. That way you're not left with nothing if price runs. Check your journal over a few months to see what share of your breakouts actually retested. If it's high on your pair and timeframe, waiting makes sense. If it's low, a different entry method might suit you better.
It’s Fairman :geek:
LondonNewsTrader
Posts: 421
Joined: Mon Sep 21, 2026 9:30 am

Re: Retests: The Second Chance After a Breakout

Post by LondonNewsTrader »

Fairman wrote: The downside is that not every breakout retests. Strong moves can run away without looking back, and waiting means missing them.
What caused the breakout seems to make a big difference to whether a retest comes. A break on a large data surprise often doesn't look back for hours, because the market is repricing to a new level rather than testing an old one. A break during ordinary session flow, with nothing on the calendar, retests far more often, since there's no fresh information forcing participants to chase.

When you log your next five breakouts, add a column for what triggered each one: release, session open, or nothing obvious. It gives a simple rule for when waiting for the retest is worth the missed trades and when it mostly means watching from the sidelines. On the release breaks, a smaller position on the first shallow pullback within the move can be a reasonable compromise.
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Retests: The Second Chance After a Breakout

Post by Fairman »

For entries on retests, I like seeing a rejection on the lower timeframe at the retested level rather than just placing a limit order at the line. Retests often overshoot by a few pips, and a blind limit gets stopped out on the overshoot. The trade-off is that some retests only touch the level and leave without giving a lower timeframe signal, so you'll miss some. In my journal, the confirmed entries had a higher win rate and fewer stops, which made up for the misses. Treat the level as a zone of a few pips rather than an exact line.
It’s Fairman :geek:
FXS Prop Desk
Posts: 1692
Joined: Wed Oct 07, 2026 9:52 am

Re: Retests: The Second Chance After a Breakout

Post by FXS Prop Desk »

One more number worth adding to that five-breakout log: how many candles passed between the break and the retest. A quick return within a handful of M5 bars is a different situation from a retest that shows up two or three hours later, often in the next session. By then the traders who missed the break have mostly moved on, and the level carries less weight.

Depth relative to the breakout candle is another useful measure. If the pullback retraces more than about half of that candle's range, the break looks weaker, and cutting size may make more sense than skipping it. Do you treat a second touch of the same level as still valid, or only the first?
FXS Official Team | The Idea Lab & Strategy
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Retests: The Second Chance After a Breakout

Post by Shadow Trader »

On the second touch question, the orders that make a retest work mostly get used up on the first visit. The traders who missed the break and the ones waiting to get out at breakeven are largely filled the first time, so a second touch leans on whatever is left.

There is also a payoff angle that makes missing some retests easier to accept. Say a breakout entry fills 4 pips above the level with a 12 pip stop, and a retest entry fills at the level with a 6 pip stop, both aiming 18 pips above the level.

The breakout trade is reaching for 14 pips on 12 of risk, about 1.2R, while the retest reaches for 18 on 6, which is 3R. Break even win rates follow directly, at about 46 percent for the first and 25 percent for the second.

That gap is what pays for the moves that leave without coming back. The retest approach can miss a lot of trades and still come out ahead, provided the ones it takes hold the level often enough.

The weak point is the overshoot mentioned earlier. A 6 pip stop leaves little room, so a retest that pokes 4 pips through the zone before turning will take most of those stops out.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Retests: The Second Chance After a Breakout

Post by Shadow Trader »

The overshoot problem can be sized before choosing the stop, by logging how far each retest pushes through the level before turning. Price that never pokes through counts as zero.

Say 20 made up retests overshoot by 0, 0, 1, 1, 1, 2, 2, 2, 2, 3, 3, 3, 4, 4, 5, 5, 6, 7, 9 and 12 pips. Sixteen of them stay within 5 pips, so a 6 pip stop survives 16 of 20 retests, while an 8 pip stop survives 18 and loses only the 9 and 12 pip pokes.

With the 18 pip target from earlier, the 6 pip stop pays 3R and needs a 25 percent win rate to break even. The 8 pip stop pays 2.25R and needs about 31 percent, so the wider stop costs 6 percentage points of break even rate to save two trades in twenty.

Whether that is worth it depends on how many of the saved trades would actually reach the target. Logging the result after each overshoot answers that, and it also shows whether Fairman's lower timeframe rejection filter removes the deep pokes in the first place.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Retests: The Second Chance After a Breakout

Post by Shadow Trader »

Breakout traders buy strength. Pullback traders wait for the dip. Both can make money, and both can lose in the opposite market condition.

Breakouts catch fast moves but often enter at poor prices and meet false breaks. The stop is usually behind the breakout level, which can be a large distance relative to the target.

Pullbacks offer better prices and tighter stops, but many strong moves never pull back, so the trader keeps watching them leave. The patience required is substantial.

Some combine the two: wait for a breakout, then enter on the first retest. That reduces false breakouts while still getting in early, though some trades never retest.

Practical angle: pullback entries need a defined idea of "how deep is too deep". A common approach uses a fraction of the preceding impulse, such as a 38% to 61% retracement, with the idea being that deeper pullbacks signal the move may be over. Whether that holds on fast charts is something to measure, not assume.

Which approach fits more naturally, and has a hybrid ever outperformed pure breakout or pure pullback entries?
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Retests: The Second Chance After a Breakout

Post by Fairman »

The idea of logging what caused each breakout is simple and I should have thought of it. My feeling has been that retests are about luck, but I think it's the trigger. Last month I took breakouts on EURUSD and GBPUSD, and the ones during a release ran without looking back, while the ones in ordinary London flow came back to the level about two thirds of the time.

A hypothetical log of ten breaks: four on releases, with one retest; six in normal flow, with four retests. If I waited on every break, I'd have had five entries, with the four in normal flow at, say, +1.2R each on a tight stop and the lone release retest at -1R. Total +3.8R. The five that never came back would have been missed, and if they averaged +2R, that's 10R that stayed on the table. So waiting isn't free.

Your compromise of a smaller position on the first shallow pullback within the move seems practical. Say half size at 0.25 lots and a stop below the pullback low.

How shallow is shallow for you, a third of the move or less? And do you ever add to that position once it makes new highs?
It’s Fairman :geek:
Post Reply