Advertisement IC Markets

Order Types Explained, Market, Limit, Stop and Why They Matter

Compare ECN/Raw spread brokers, analyze execution speeds, report slippage, and evaluate commission structures for high-frequency traders.
Post Reply
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Fairman »

Order Types Explained, Market, Limit, Stop and Why They Matter

Choosing the right order type changes your fills, your costs, and your risk. Many beginners use market orders for everything and wonder why their results suffer.

Market order. Executes immediately at the best available price. Fast, but you accept the current spread and possible slippage.

Limit order. Executes only at your chosen price or better. For buys, placed below the current price. For sells, above. You may get a better price, but the order may never fill.

Stop order (entry). Becomes a market order once price reaches your level. For buys, placed above the current price. For sells, below. Used for breakouts.

Stop loss. An order that closes your position at a specified loss level.

Take profit. An order that closes your position at a specified profit level.

How to choose:

- Use limit orders when you want a precise entry in a zone, such as a fair value gap
- Use market orders when speed matters after confirmation
- Use stop entry orders for breakouts, but beware of slippage and false breaks

Practical tips:

1. Always know which type you're placing.
2. Check order direction before confirming.
3. Remember that stop losses can slip in fast markets.
4. Review your journal for how often you used each type and how results differed.

A small mistake in order type can lead to unexpected trades.

Slow down for ten seconds, read the ticket, and click only when it says what you intend.
It’s Fairman :geek:
Recommended broker for automated trading & scalping IC Markets
LondonNewsTrader
Posts: 421
Joined: Mon Sep 21, 2026 9:30 am

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by LondonNewsTrader »

Worth adding which side of the quote triggers what, because that catches people around news and at rollover. On MT4 and MT5 a buy stop and a buy limit trigger on the ask, sell orders on the bid. A stop loss on a long position is a sell, so it triggers on the bid. A stop on a short is a buy and triggers on the ask.

Why that matters: when the spread blows out from 1 pip to 8 at 22:00 London time, or in the seconds after NFP, the ask jumps even if the bid chart you are looking at barely moves. Short positions with tight stops get closed by a price that never appears on a bid-only chart, and then people blame the broker for a stop hunt.

On the entry side, a buy stop placed above a range before a release is the worst order you can leave in the book. It fills on the spike, at whatever price is available, which is often well past your level.
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Fairman »

A worked example of why it matters. If price is at 1.0850 and you want to buy a pullback to 1.0830, that's a buy limit. If you want to buy only if price breaks above 1.0870, that's a buy stop. People mix these up and get filled in the opposite situation to the one they planned. On MetaTrader, if you place a buy stop below the current price by mistake, the platform will usually reject it, but some setups and other platforms just fill you immediately at market. Always read the order ticket out loud before sending: buy, limit, price, stop loss, take profit. It sounds silly but it catches most of these mistakes before they cost anything.
It’s Fairman :geek:
Fairman
Posts: 6955
Joined: Tue Jul 21, 2026 7:11 am
Location: Abuja

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Fairman »

To be fair, market orders aren't bad. They're just the most expensive in fast markets. When price is calm and spreads are tight, a market order is fine. It's in fast moves or thin liquidity that the difference between order types really shows. On EURUSD during the London session, the difference between a market order and a limit might be a fraction of a pip. During the minute after NFP at 1:30pm Lagos, a market order could fill several pips away from what you saw. So I use market orders in normal conditions and limits for planned entries at a level.
It’s Fairman :geek:
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Shadow Trader »

One order type missing from the list is the stop limit, which MT5 offers as buy stop limit and sell stop limit. It works like a stop entry, but once triggered it places a limit order rather than a market order.

Say price is at 1.0860 and the breakout level is 1.0870. A buy stop limit triggered at 1.0870 with its limit at 1.0872 can only fill up to 2 pips worse than the trigger.

If price jumps from 1.0868 straight to 1.0880 on a release, the order triggers but sits unfilled unless price comes back to 1.0872. For a scalper that is often the better outcome, though on a clean, fast breakout it means missing the move.

The other quiet problem is expiry. A pending order left as good till cancelled on a Friday is still live at the Sunday open, and a gap through it fills at the first available price.

Setting an expiry time on every pending order is a small habit that prevents that. It also clears out old levels that no longer match the plan.

Does anyone here use stop limits for breakouts? I am curious whether missing the occasional runner costs more than the slippage it saves.
FXS Prop Desk
Posts: 1689
Joined: Wed Oct 07, 2026 9:52 am

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by FXS Prop Desk »

For scalpers, limit orders for entries and targets often reduce costs, while stops protect against large losses. Using market orders for everything usually means paying more in slippage over time.

One detail many beginners miss: a stop order becomes a market order when triggered, so in fast markets it can fill at a worse price. A stop limit avoids that but may not fill at all, which is a risk of its own.
FXS Official Team | The Idea Lab & Strategy
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Shadow Trader »

One combination worth a warning is the straddle, with pending orders on both sides of a range before a release. MetaTrader has no built in one cancels other link, so both legs stay live until something removes them.

Say the buy stop sits at 1.0880 and the sell stop at 1.0840. The number spikes price up, the long fills at 1.0884 with 4 pips of slippage, and then the move reverses through 1.0840, filling the short at 1.0838.

On a netting account the sell simply closes the long, a loss of 46 pips plus costs. On a hedging account both stay open, so the 46 pips are locked in and two spreads have been paid. Closing one leg later turns the other into a fresh position with no plan behind it.

Trailing stops have a related catch. On MT4 and MT5 they run in the terminal on your own machine, so if the platform closes or the connection drops, the trail simply freezes at its last level.

Does anyone here still straddle releases, or wait for the first candle to close instead? Most scalpers seem to have moved away from it.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Shadow Trader »

In theory, slippage should be symmetrical, with positive and negative fills cancelling out over many trades. In practice, several mechanisms push the balance toward the negative side, and scalpers operating on small targets feel this more than anyone.

Order type is the first factor. Market and stop orders are executed on arrival, so they take whatever is available, and they are usually triggered precisely when price is moving fast. Limit orders can only be filled at the stated price or better, so they avoid negative slippage but face the risk of not being filled at all.

The second factor is broker policy. Some execution models pass positive slippage on to the client, while others apply price improvement only partially or not at all. This is stated in execution policy documents, and it can change the long-run cost materially.

A useful habit is to log the requested price and the filled price for every trade, then separate entries from exits and market orders from limits. Over a few hundred trades, the distribution shows whether slippage is truly symmetrical or skewed. If skewed, the average negative figure can be treated as a regular cost line, much like spread, and included in expectancy calculations.
Shadow Trader
Posts: 5594
Joined: Wed Sep 09, 2026 5:19 pm

Re: Order Types Explained, Market, Limit, Stop and Why They Matter

Post by Shadow Trader »

Everyone says wired is better. How much better, and does it matter for a scalper on a home connection?

A simple experiment answers the question. Run a continuous ping to the broker's server for an hour on Wi-Fi, then an hour on ethernet. Record average, maximum, and the spread between them, which is the jitter. Then compare the numbers.

Typical findings: the average might be similar, but Wi-Fi often shows more spikes, with occasional ping times several times higher than normal. Those spikes tend to arrive at random moments, including during an important trade.

Interference from neighbors, microwaves, and other devices can all play a part. Wired connections are not immune to problems, but they're generally more consistent.

For strategies where execution timing matters, consistency is the key variable.

Some traders take the test further by running both connections at the same time and comparing tick arrival timestamps on the same pair. Differences of even 20 to 30 milliseconds show up clearly, and they're a useful reminder that "fast internet" and "fast for trading" aren't the same thing.

What did the test show, and how much did the connection type matter?
Post Reply