Bid, Ask and Spread, The Cost You Pay on Every Trade
Every price quote in forex has two numbers: the bid and the ask. Understanding them is basic, but many beginners skip over it and then wonder why their trades start in the red.
Bid price: the price at which you can sell.
Ask price: the price at which you can buy.
Spread: the difference between the two.
Example: EURUSD bid 1.0850, ask 1.0852. The spread is 0.0002, or 2 pips.
What this means:
- If you buy, you pay the ask price. Your trade starts slightly below breakeven, since you could only sell at the lower bid price.
- If you sell, you receive the bid price.
- The spread is a cost, like a small fee, built into every trade.
What affects spreads:
- Liquidity: busy pairs and sessions often have tighter spreads
- Volatility: spreads widen during news and fast moves
- Time of day: spreads often widen during rollover or off-hours
- Broker type: some brokers charge wider spreads with no commission, others offer tighter spreads plus a commission
How to deal with spreads:
1. Trade major pairs during active sessions.
2. Avoid entering at illiquid times.
3. Include spreads in your risk calculations.
4. Choose targets large enough that spreads don't consume your profit.
A 2 pip spread on a 10 pip target takes a fifth of your gain.
Know your costs before you trade. They show up in every statement.
Bid, Ask and Spread, The Cost You Pay on Every Trade
Bid, Ask and Spread, The Cost You Pay on Every Trade
It’s Fairman 
Re: Bid, Ask and Spread, The Cost You Pay on Every Trade
Practical point for beginners: check the spread at the time of day you trade, not the advertised minimum. On a lot of brokers the spread widens around the daily rollover, around 10pm or 11pm Lagos time depending on US daylight saving. Trades opened then start further in the red. The easiest habit is to glance at the spread before every entry and write it in your journal next to the trade. After a few weeks you'll see the normal number for your session and pair. If it's double that when you're about to click, something is going on, maybe news or thin liquidity, and it's often better to wait a few minutes.
It’s Fairman 
Re: Bid, Ask and Spread, The Cost You Pay on Every Trade
Don't compare brokers only by spread. Some have very low spreads but charge a commission per lot. Add both together to get the real cost before you decide which one is cheaper. For example, a standard account with a 1.2 pip spread costs about 12 dollars per lot on EURUSD. A raw account with a 0.2 pip spread plus 7 dollars commission per round lot costs about 9 dollars. Then check the spreads at the times you actually trade, since a broker's advertised minimum spread might only exist during the London session. Swap rates matter too if you hold trades overnight regularly.
It’s Fairman 
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: Bid, Ask and Spread, The Cost You Pay on Every Trade
The fifth of your gain figure looks worse as a breakeven win rate, since the spread hits winners and losers alike. With a 10 pip target and a 10 pip stop, a winner nets 8 pips after a 2 pip spread and a loser costs 12.
That moves the win rate needed to break even from 50 percent to 60 percent, as the chart shows. Stretch the same trade to a 30 pip target and stop and the 2 pip spread only lifts it to about 53 percent.
At 3 pips, which is common for a few minutes around rollover, the 10 pip version needs 65 percent. Very few scalping methods hold that kind of hit rate for long.
One thing that confuses beginners is that most platforms quote five decimals now. EURUSD at 1.08502 and 1.08522 is a 2 pip spread, but MT5 shows it as 20 points in the spread column, and people misread it by a factor of ten.
Writing the spread down in pips rather than points avoids that mix up when comparing brokers. It also makes the commission easier to add in, since 7 dollars per lot on EURUSD works out to 0.7 pips.
That moves the win rate needed to break even from 50 percent to 60 percent, as the chart shows. Stretch the same trade to a 30 pip target and stop and the 2 pip spread only lifts it to about 53 percent.
At 3 pips, which is common for a few minutes around rollover, the 10 pip version needs 65 percent. Very few scalping methods hold that kind of hit rate for long.
One thing that confuses beginners is that most platforms quote five decimals now. EURUSD at 1.08502 and 1.08522 is a 2 pip spread, but MT5 shows it as 20 points in the spread column, and people misread it by a factor of ten.
Writing the spread down in pips rather than points avoids that mix up when comparing brokers. It also makes the commission easier to add in, since 7 dollars per lot on EURUSD works out to 0.7 pips.
-
FXS Prop Desk
- Posts: 1689
- Joined: Wed Oct 07, 2026 9:52 am
Re: Bid, Ask and Spread, The Cost You Pay on Every Trade
Spreads vary through the day, often widening at rollover and around news. Watching the spread on your platform at different times (most platforms can show it) helps beginners understand when trading is cheaper and when it is more expensive.
Checking the spread before entering, especially at less active times, helps avoid overpaying on entry.
For beginners, a useful habit is to note the spread in pips next to each planned stop; if the spread is a large share of the stop, the trade is more expensive than it looks.
Checking the spread before entering, especially at less active times, helps avoid overpaying on entry.
For beginners, a useful habit is to note the spread in pips next to each planned stop; if the spread is a large share of the stop, the trade is more expensive than it looks.
FXS Official Team | The Idea Lab & Strategy
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: Bid, Ask and Spread, The Cost You Pay on Every Trade
One side effect of the bid and ask that catches people out is which price triggers the stop. On most platforms the candles are drawn from the bid, but a short position closes at the ask, so its stop and target both fire on a price the candles do not show.
Say you are short EURUSD with a stop at 1.0870 just before rollover. The bid tops out at 1.0866, four pips short of the stop, but the spread widens to 5 pips for a minute and the ask touches 1.0871.
The trade is closed even though the candles never reached the level. Looking back afterwards it seems like the broker hunted the stop, when it was simply the ask doing its job.
Targets work the same way in reverse. A short with a take profit at 1.0820 needs the ask to get there, so the bid has to trade about one spread lower, which is why shorts sometimes miss a target by a pip or two.
Most platforms, MT5 included, can draw an ask line over the candles. Turning it on and placing short stops at least one normal spread beyond the level removes most of these surprises, and it fits the habit FXS Prop Desk described of writing the spread next to each stop.
Say you are short EURUSD with a stop at 1.0870 just before rollover. The bid tops out at 1.0866, four pips short of the stop, but the spread widens to 5 pips for a minute and the ask touches 1.0871.
The trade is closed even though the candles never reached the level. Looking back afterwards it seems like the broker hunted the stop, when it was simply the ask doing its job.
Targets work the same way in reverse. A short with a take profit at 1.0820 needs the ask to get there, so the bid has to trade about one spread lower, which is why shorts sometimes miss a target by a pip or two.
Most platforms, MT5 included, can draw an ask line over the candles. Turning it on and placing short stops at least one normal spread beyond the level removes most of these surprises, and it fits the habit FXS Prop Desk described of writing the spread next to each stop.
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: Bid, Ask and Spread, The Cost You Pay on Every Trade
Standard platform charts display bid prices. Long positions open at the ask and close at the bid, while short positions open at the bid and close at the ask. A strategy tested only on a bid chart quietly ignores the ask side of every long entry.
The difference equals the spread, which can be small on average yet large at the wrong moments. A buy signal generated when the bid crosses a level actually fills when the ask is higher, so the real entry sits further from the signal than the chart suggests.
Accurate backtests use both bid and ask series, applying each according to trade direction. Some platforms offer an option to display ask lines or to chart on the last price. A mid-price chart is a reasonable neutral view for signal research, as long as execution costs are added back separately. For scalpers, where average profit per trade may be only a few pips, this correction can decide whether a system is viable.
The difference equals the spread, which can be small on average yet large at the wrong moments. A buy signal generated when the bid crosses a level actually fills when the ask is higher, so the real entry sits further from the signal than the chart suggests.
Accurate backtests use both bid and ask series, applying each according to trade direction. Some platforms offer an option to display ask lines or to chart on the last price. A mid-price chart is a reasonable neutral view for signal research, as long as execution costs are added back separately. For scalpers, where average profit per trade may be only a few pips, this correction can decide whether a system is viable.