Where to Take Profit, Targeting Liquidity
Many traders spend weeks on entries and five seconds on exits. Yet where you take profit shapes your entire equity curve.
In SMC, the logic is simple: price moves from one liquidity pool to another. So your targets should be liquidity levels.
Common target choices:
- The previous swing high or low
- Equal highs or equal lows
- The opposite side of the Asian or London range
- Previous day or week highs and lows
- An imbalance (FVG) that hasn't been filled
A practical plan:
1. Before entering, identify the nearest opposing liquidity pool.
2. Measure the distance from your entry to that target and compare it with your stop distance. If reward is under 1:2, skip or find a better entry.
3. Consider taking partial profit (for example, half) at the first target and moving the stop to break-even.
4. Let the rest run to the next liquidity level.
Warnings:
- Don't set the take profit exactly at the equal high. Price often sweeps it first, so place it slightly before.
- Don't change targets mid-trade because of excitement.
- Don't hold for "just a little more" once your plan is complete.
A trade with a clear target is a trade with a clear plan. Write both stop and target before you click. Greed hates plans, and that's why plans work.
Where to Take Profit, Targeting Liquidity
Where to Take Profit, Targeting Liquidity
It’s Fairman 
-
PropScalpDesk
- Posts: 521
- Joined: Sat Sep 19, 2026 7:50 pm
Re: Where to Take Profit, Targeting Liquidity
Steps 2 and 3 interact. Take half off at the first target and let the rest run to 2R, and a full win averages 1.5R, not 2R. So "1:2 minimum" plus partials is really a 1:1.5 filter on the trades that work, and the expectancy maths should use that.
The break-even stop has a cost problem too. On a commission account a stop at the exact entry closes slightly negative, and on a short the spread adds to it. I put it a pip beyond entry so "break-even" really is flat.
Fully agree on not parking the target exactly at equal highs, or exactly on a round number.
The break-even stop has a cost problem too. On a commission account a stop at the exact entry closes slightly negative, and on a short the spread adds to it. I put it a pip beyond entry so "break-even" really is flat.
Fully agree on not parking the target exactly at equal highs, or exactly on a round number.
-
LondonNewsTrader
- Posts: 421
- Joined: Mon Sep 21, 2026 9:30 am
Re: Where to Take Profit, Targeting Liquidity
Partials and break-even are sensible on quiet days, but around scheduled data they need a second look. A break-even stop 2 or 3 pips from entry sits right in the zone that the spread spike can reach in the seconds after a release, so you can be stopped at entry by a price that only existed on the ask side for a moment.
I'd also add timing to the target plan, not just distance. If the opposing liquidity is 40 pips away and US retail sales is due in 25 minutes, the real question is whether you intend to hold through the number. Decide that before entry. Either the target has to be reached before the release, or the position is cut to a size you are comfortable carrying through it.
Your warning about placing the take profit just before the equal high is good. Same logic applies to round numbers before a fix or a big option expiry.
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: Where to Take Profit, Targeting Liquidity
PropScalpDesk's 1.5R figure is right for the trades that reach the second target, but it leaves out the group that partials actually rescue. A trade that tags 1R, banks half and then comes back to a break-even stop finishes at plus 0.5R instead of the full loss it would have been.
A rough example with made up but realistic counts: out of 100 trades, 55 reach 1R and 35 of those carry on to 2R. Holding the full position to 2R gives 70R won against 65R lost, so plus 5R, while the partial version gives 52.5R plus 10R minus 45R, which is plus 17.5R.
The catch is the trades a tight break-even stop kills. Some of those 20 would have dipped back toward entry and still made 2R, and LondonNewsTrader's point about spread spikes after releases makes that group bigger on data days.
My own compromise is to move the stop only after the next M5 swing forms beyond 1R, not the moment 1R prints. It gives back a little on the scratches but keeps more of the runners.
Fairman, do you place the first target at the nearest pool or at a fixed 1R and let the pool be the second? The answer changes which version of the maths above applies.
A rough example with made up but realistic counts: out of 100 trades, 55 reach 1R and 35 of those carry on to 2R. Holding the full position to 2R gives 70R won against 65R lost, so plus 5R, while the partial version gives 52.5R plus 10R minus 45R, which is plus 17.5R.
The catch is the trades a tight break-even stop kills. Some of those 20 would have dipped back toward entry and still made 2R, and LondonNewsTrader's point about spread spikes after releases makes that group bigger on data days.
My own compromise is to move the stop only after the next M5 swing forms beyond 1R, not the moment 1R prints. It gives back a little on the scratches but keeps more of the runners.
Fairman, do you place the first target at the nearest pool or at a fixed 1R and let the pool be the second? The answer changes which version of the maths above applies.
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: Where to Take Profit, Targeting Liquidity
The slightly before rule needs a different buffer on shorts than on longs. Platforms build their candles from bid prices, and a long's take profit fills on the bid too, but a short's take profit fills on the ask, which sits a spread above the line you are looking at.
Say a short targets equal lows at 1.0800 on the bid price with a 0.8 pip spread. A take profit at 1.0800 needs the bid to reach 1.0792, so a sweep that tags 1.0800 exactly and reverses leaves the trade open.
So for shorts the buffer is the spread plus whatever margin you would use on a long. On a long, a target 2 pips under equal highs fills as soon as the bid gets there, with nothing extra needed.
The same asymmetry hits the opposite side of the Asian range target. If Asia already printed a 40 pip range, the far side may be beyond a realistic London move, so a midpoint target or a skip is often the honest choice.
LondonNewsTrader, does the round number before a fix shift your target, or do you just flatten before the fix and leave it at that? The fix tends to pin price near those levels for a while.
Say a short targets equal lows at 1.0800 on the bid price with a 0.8 pip spread. A take profit at 1.0800 needs the bid to reach 1.0792, so a sweep that tags 1.0800 exactly and reverses leaves the trade open.
So for shorts the buffer is the spread plus whatever margin you would use on a long. On a long, a target 2 pips under equal highs fills as soon as the bid gets there, with nothing extra needed.
The same asymmetry hits the opposite side of the Asian range target. If Asia already printed a 40 pip range, the far side may be beyond a realistic London move, so a midpoint target or a skip is often the honest choice.
LondonNewsTrader, does the round number before a fix shift your target, or do you just flatten before the fix and leave it at that? The fix tends to pin price near those levels for a while.
-
FXS Prop Desk
- Posts: 1692
- Joined: Wed Oct 07, 2026 9:52 am
Re: Where to Take Profit, Targeting Liquidity
One addition to the list of targets: the previous day's high or low and weekly opening levels are often watched by many traders and act as reliable liquidity points. Taking partial profits at the first pool and holding the remainder for the next one also helps, since price does not always reach the more distant target.
Writing the planned target into the journal before entry also helps assess later whether exits were followed.
Writing the planned target into the journal before entry also helps assess later whether exits were followed.
FXS Official Team | The Idea Lab & Strategy
-
Shadow Trader
- Posts: 5594
- Joined: Wed Sep 09, 2026 5:19 pm
Re: Where to Take Profit, Targeting Liquidity
Liquidity gets blamed for everything. "Price went for the liquidity." "Liquidity grab." The word has become a catch-all.
In plain terms, liquidity is the ability to trade a size without moving price much. A liquid market has many buyers and sellers close to the current price. An illiquid one has gaps in the book, so even a modest order pushes price.
The term also refers to resting orders. Stop losses above a high or below a low represent pending orders that will turn into market orders if triggered. Large participants sometimes find those clusters useful because triggered stops provide counterparties.
Whether price deliberately hunts those levels is debated. What is not debated is that clustered orders create price levels where activity concentrates.
For retail scalpers, the practical lesson is modest. Stops placed at obvious levels are more likely to be filled in a spike. Slightly beyond, or based on volatility, tends to work better.
How is stop placement decided here relative to obvious highs and lows?
In plain terms, liquidity is the ability to trade a size without moving price much. A liquid market has many buyers and sellers close to the current price. An illiquid one has gaps in the book, so even a modest order pushes price.
The term also refers to resting orders. Stop losses above a high or below a low represent pending orders that will turn into market orders if triggered. Large participants sometimes find those clusters useful because triggered stops provide counterparties.
Whether price deliberately hunts those levels is debated. What is not debated is that clustered orders create price levels where activity concentrates.
For retail scalpers, the practical lesson is modest. Stops placed at obvious levels are more likely to be filled in a spike. Slightly beyond, or based on volatility, tends to work better.
How is stop placement decided here relative to obvious highs and lows?
Re: Where to Take Profit, Targeting Liquidity
Putting a time to the target and not only a distance fixes something I'd never written down. I'd plan a 40 pip target against opposing liquidity and then not notice that retail sales was due in 25 minutes. The actual question, as you say, is whether I'm holding through the number, and I should decide that before the entry.
A rule I could use: estimate how long the move needs by dividing the target by the typical pips per hour for that session. If EURUSD moves about 12 pips an hour on a quiet London morning, 40 pips needs over three hours, and with a release at 25 minutes the answer is no, the target can't be reached first. So either I shrink the target to something like 8 pips, or I take half size and a stop I can tolerate being jumped.
For example, 0.3 lots with a 10 pip stop is 30 dollars. If I'm holding through retail sales and the stop fills 15 pips worse, the real loss is 75 dollars. That's two and a half times the plan, and it's why I'd rather reduce before the number.
The point on equal highs and round numbers before the fix is useful too. I've taken profit just before them and then watched price blow through, but also left it a few pips short and been stopped on the reversal. Where do you put the take profit relative to the level, five pips short or ten? And do you scale out at the first liquidity pool or keep it for the last one?
A rule I could use: estimate how long the move needs by dividing the target by the typical pips per hour for that session. If EURUSD moves about 12 pips an hour on a quiet London morning, 40 pips needs over three hours, and with a release at 25 minutes the answer is no, the target can't be reached first. So either I shrink the target to something like 8 pips, or I take half size and a stop I can tolerate being jumped.
For example, 0.3 lots with a 10 pip stop is 30 dollars. If I'm holding through retail sales and the stop fills 15 pips worse, the real loss is 75 dollars. That's two and a half times the plan, and it's why I'd rather reduce before the number.
The point on equal highs and round numbers before the fix is useful too. I've taken profit just before them and then watched price blow through, but also left it a few pips short and been stopped on the reversal. Where do you put the take profit relative to the level, five pips short or ten? And do you scale out at the first liquidity pool or keep it for the last one?
It’s Fairman 